Initialization And De-Initialization Functions; Peripheral Control Functions; Io Operation Functions - ST STM32F2 User Manual

UM1940
4. Optionally, in case of usage of DMA:
6.2.3

Initialization and de-initialization functions

This section provides functions allowing to:
Initialize and configure the ADC.
De-initialize the ADC.
This section contains the following APIs:
HAL_ADC_Init()
HAL_ADC_DeInit()
HAL_ADC_MspInit()
HAL_ADC_MspDeInit()
6.2.4

IO operation functions

This section provides functions allowing to:
Start conversion of regular channel.
Stop conversion of regular channel.
Start conversion of regular channel and enable interrupt.
Stop conversion of regular channel and disable interrupt.
Start conversion of regular channel and enable DMA transfer.
Stop conversion of regular channel and disable DMA transfer.
Handle ADC interrupt request.
This section contains the following APIs:
HAL_ADC_Start()
HAL_ADC_Stop()
HAL_ADC_PollForConversion()
HAL_ADC_PollForEvent()
HAL_ADC_Start_IT()
HAL_ADC_Stop_IT()
HAL_ADC_IRQHandler()
HAL_ADC_Start_DMA()
HAL_ADC_Stop_DMA()
HAL_ADC_GetValue()
HAL_ADC_ConvCpltCallback()
HAL_ADC_ConvHalfCpltCallback()
HAL_ADC_LevelOutOfWindowCallback()
HAL_ADC_ErrorCallback()
6.2.5

Peripheral Control functions

This section provides functions allowing to:
Configure regular channels.
Configure injected channels.
Configure multimode.
Configure the analog watch dog.
Disable the NVIC for ADC using function HAL_NVIC_DisableIRQ(ADCx_IRQn)
Deinitialize the DMA using function HAL_DMA_DeInit().
Disable the NVIC for DMA using function
HAL_NVIC_DisableIRQ(DMAx_Channelx_IRQn)
DocID028236 Rev 2
HAL ADC Generic Driver
83/1371