Customizing Operator Icons - Avaya CS7000 Administrator's Manual

Chapter 15: Administering the Avaya Operator Console

Customizing Operator Icons

Operator icons can now be customized. Using this functionality, distinctive icons can be
assigned to individual Operators. This functionality simplifies the task of distinguishing between
Operators.
The icons must be bitmap files that are 24 pixels wide and 16 pixels high, with 16 colors.
A parameter in C2000con.ini, called OpUserPath, specifies a network folder, such as Icons in
Figure 121 . Within the specified folder, the Avaya CS7000 System Administrator must create
several folders. The name of each of these folders must correspond with an Operator name.
One or more bitmap files must exist within each of these folders, which conform to the specified
naming and sizing criteria. They are used in place of the corresponding standard Operator icons
for that Operator.
To set up customized icons:
1. Create a base folder on the network.
2. Create another folder within this base folder.
This second folder should have the same name as the Operator.
Figure 121: Directory Structure for Customized Operator Icons
238
CS7000 System Administrator Guide for Release 9.4
Operator.exe
C2000con.ini
C2000con
Directory Structure for Customized Operator Icons
Mary
Icons
John
conf.bmp
mute.bmp
open.bmp
close.bmp
int.bmp
conf.bmp
mute.bmp
open.bmp
close.bmp
int.bmp
January 2006