Avaya CS7000 Administrator's Manual page 130

Chapter 8: Configuring the Bands Initialization File
Table 17: Login Parameters and Custom Settings (continued)
Parameter
CheckAccountSize
CheckResourceSize
ReadOnlyCompanies
130
CS7000 System Administrator Guide for Release 9.4
Description
CheckAccountSize controls whether account
numbers are a pre-determined length or can be any
length. If you disable CheckAccountSize, you can
vary account number length. If you enable
CheckAccountSize, you must ensure that account
numbers are a set size. The possible values are as
follows:
CheckAccountSize=0
●
CheckAccountSize is disabled.
● CheckAccountSize=1*
CheckAccountSize is enabled.
You can configure account size on the System
Parameters section in the CRS Front End.
Resources in the CRS Front End are cards, such as
DPRI cards and CNF cards. If you enable
CheckResourceSize, the system checks the size of
resources that you enter. For example, DPRI cards
can be 30 or 60 ports in size. This parameter is an
historical parameter and is usually no longer used. By
default, CheckResourceSize=0*.
The ReadOnlyCompanies parameters restricts
access to company data on the CRS database, which
is called BSRes2. If you enable
ReadOnlyCompanies, Operators cannot edit
company data. If you disable ReadOnlyCompanies,
Operators can add new companies, update existing
companies, and delete companies. The possible
values are as follows:
● ReadOnlyCompanies=0*
ReadOnlyCompanies is disabled.
ReadOnlyCompanies=1
●
ReadOnlyCompanies is enabled.
7000/7X0
7000/7X0
7000/7X0
7000/7X0
5 of 10
January 2006