Table of Contents
Advertisement
Chapter 17: Administering the Avaya Demand PIN Master
Table 83: Settings (continued)
Parameter
DialTimeoutSecs
CustomerDataSource
260
CS7000 System Administrator Guide for Release 9.4
Example Value
The parameter, DialTimeoutSecs, was active in previous
releases but in recent times, Avaya made it obsolete. Avaya has
now reinstated DialTimeoutSecs. It now ensures that if users do
not answer calls that the system starts, the system disconnects
these calls. DialTimeoutSecs specifies a timeout, in seconds,
after which the system disconnects these unanswered calls. The
default value is zero. Any value, greater than zero equates to the
timeout period.
DialTimeoutSecs enables the system to make several attempts
to contact a participant for alert conferencing. For example, if the
caller does not respond to a call to their main telephone number,
the system dials a secondary contact number. If they do not
respond to this call, the system dials a third contact number. For
more information, see the Avaya CS7000 Alerts Conferencing
Guide for Release 9.4.
The parameter, CustomerDataSource, controls whether the
system starts the Customer.dll file. If you ensure that
CustomerDataSource is blank, the system does not start the
Customer.dll file. The system uses the Customer.dll file to look
up a linked database for external CLI identification. If
CustomerDataSource is blank, CLI identification is disabled.
5 of 5
January 2006
Advertisement
Table of Contents
