Configuring Multiple Operator Consoles On One Workstation - Avaya CS7000 Administrator's Manual

Chapter 15: Administering the Avaya Operator Console
Configuring Multiple Operator Consoles on one
Workstation
You can configure multiple Operator Consoles on one workstation. Using this functionality,
Operators can access several bridges from their workstation.
If the bridges have the same version number, a single Operator executable can be used. The
executable is located in the C2000con folder. An Operator ini file is required for each bridge. For
example, if three bridges are running, three Operator ini files are required. Folders must be
created within the C2000con folder for each separate Operator ini file. In addition, shortcuts
must be created on the workstation desktop for each separate bridge.
sample directory structure.
Figure 112: Directory Structure for Multiple Operator Consoles
Directory Structure for Multiple Operator Consoles
The desktop shortcuts must contain the full path of the Operator exe and the appropriate
Operator ini file. The paths must be separated by a single space. For example:
C:\C2000con\Operator.exe C:\C2000con\bridge 1\Operator.ini
Figure 113 shows an example shortcut properties dialog.
230
CS7000 System Administrator Guide for Release 9.4
C:\ C2000con
Figure 112
Operator.exe
Operator.ini
Operator.ini
Operator.ini
shows a
January 2006