Chapter 8: Configuring the Bands Initialization File
The Bands.ini file is divided into the following sections:
Table 17
●
Table 18
●
Table 19
●
Table 20
●
Table 21
●
Note:
The asterisk symbol indicates the default setting.
Note:
Table 17: Login Parameters and Custom Settings
Parameter
IPAddress
IPDisplayName
ValidationRequired
Graph
126
CS7000 System Administrator Guide for Release 9.4
describes login parameters and custom settings
describes reservation settings
describes conference messages settings
conference options settings
print parameter settings
Description
The IP address of the CRS server.
The displayed name of the CRS server.
A password can act as a second level of security when
the Operator logs in to the CRS Front End.
As a System Administrator, you can choose to enable
or disable this feature.
If it is enabled, Operators must enter a password when
they log on.
If it is disabled, Operators do not need to enter a
password when they log on.
To enable this feature, ensure that
ValidationRequired=1
To disable this feature, ensure that
ValidationRequired=0
The chart display type. You can select from several
different display formats, as follows:
●
Graph=0
●
Graph=1
Graph=2
●
The Bands.ini file retains the last graph type viewed by
an Operator. For example, if an Operator views a
barchart, the system displays this graph type the next
time the Operator accesses graph functionality. The
default value is 7*.
7000/7X0
7000/7X0
7000/7X0
7000/7X0
7000/7X0
1 of 10
January 2006