Avaya CS7000 Administrator's Manual page 185

Table 58: Box Fax Command (continued)
Box
Argument
Description
Table 59: Bend Fax Command
Bend
Usage
Meaning
Argument
Desc
Example
CS7000 System Administrator Guide for Release 9.4
Description
Box type
Box ID 1
Box ID N (Optional.)
This command specifies that a text box should be drawn
starting with the top left corner at the character '{' before
the BOX text. The first argument defines the type of text
box to draw. The four types are:
Single line box
●
Double line box
●
Single horizontal and double vertical lines
●
Single vertical and double horizontal lines
●
The next argument is the box ID. This is used with the
BEND (box end) command. There can be any number of
Ids separated with commas.
Description
{BEND/ID1[,IDn].}
Box end.
Box ID 1
Box ID N (Optional.)
This command specifies the end of a text box.
The bottom right corner is at the character '}' at
the end of the BEND command.
See the above BOX example.
File Templates
2 of 2
185
January 2006