Table of Contents
Advertisement
Chapter 7: Configuring System Parameters
Table 16: Field Syntax (continued)
Field
Attribute
Left
Top
Right
Bottom
bEnabled
bVisible
strDefault
To configure field names:
1. Close the CRS front end.
2. Open Ctrlpos.ini.
Ctrlpos.ini is located in C:\WINNT.
The configurable field names are listed.
Note:
The system sets fields that are specific to Avaya CS700/CS780 to invisible, using
Note:
the bVisible attribute.
3. Update field names as required.
For example, change the caption Auto Code to Auto PIN.
4. Save Ctrlpos.ini.
5. Open the CRS front end to view the changes.
124
CS7000 System Administrator Guide for Release 9.4
Description
The left coordinates of the field position.
The extent to which the field is offset from the top of the
dialog.
The right coordinates of the field position.
The extent to which the field is offset from the bottom of
the dialog.
Indicates whether the field is enabled or disabled
(greyed-out).
Indicates whether the field is visible or hidden.
The field caption.
2 of 2
January 2006
Advertisement
Table of Contents
