Table of Contents
Advertisement
Chapter 4: Configuring the Avaya Conference Management Server (CMS)
Table 5: Sysparm.fil (continued)
Parameter
AETOTAL = 100000
AUTO_CONFIG_OFF = N
ALARM_SOUND_OFF = Y
SYNC1 = 1
SYNC2 = 1
SYNC3 = 1
AUTOCLEAR = N
CLEARTIME = 900
MESSDELAY = N
DELAYTIME = 1
52
CS7000 System Administrator Guide for Release 9.4
Description
MAX size of all AEnnnn.BAK files in units of Kilobytes
before oldest deleted.
Y means that if an exception occurs, it is not
automatically handled.
Y means that the alarm on the AC-PC is not sounded
when an error is logged, required during testing to
keep noise down.
Specifies the card on shelf 1 that is to be used for
SELECT_SYNC_SOURCE. SYNC1 = 1 is card as per
operator view. In other words, it refers to HW card 0 on
HW shelf 0.
Specifies the card on shelf 2 that is to be used for
SELECT_SYNC_SOURCE. SYNC2 = 11 is card as
per operator view. In other words, it refers to HW card
10 on HW shelf 1.
Specifies the card on shelf 3 that is to be used for
SELECT_SYNC_SOURCE. SYNC3 = 12 is card as
per operator view. In other words, it refers to HW card
11 on HW shelf 2.
Y turns on the auto disconnect facility. N turns off the
auto disconnect facility. You must set up a valid
TIMER.FIL file before using this option.
When the auto disconnect facility is turned on this is
the default value in seconds for the auto disconnect
timer. If not set, or if set to zero, the system defaults to
300 secs. In other words, after 5 minutes, I/C calls are
cleared.
Y turns on the message delay facility, used to
increase efficiency of usage of limited replay
channels under high loads. N turns off the message
delay facility.
when the message delay facility is turned on this is
the value in seconds for the message delay timer. If
not set, or if set to zero and MESSDELAY = Y, the
system defaults to 2 secs.
2 of 5
January 2006
Advertisement
Table of Contents
