Table of Contents
Advertisement
Table 5: Sysparm.fil (continued)
Parameter
RINGTONE = Y
NETDRIVE = c
MOVEMESS = N
AUTOROUTE = N
ROUTESTART = 2
ROUTEEND = 28
ROUTECONF = 1
MAXCONF = 1
ROUTE# = 1
ROUTE* = 1
CS7000 System Administrator Guide for Release 9.4
Runtime options configuration file (Sysparm.fil)
Description
Y turns on the secondary ring tone facility, used to
mask possible message delays caused by limited
replay channels. N turns off the secondary ring tone
facility.
Sets the network drive used for logging of AE and AR
logs. If not specified, defaults to c.
If MOVEMESS = Y, following a "move" to a new
conference, the moved conferee is played the
conference entry (welcome) message.
If MOVEMESS = Y, following a "move" to a new
conference, the moved conferee is played the
conference entry (welcome) message.
If AUTOROUTE = Y, the AC_PC moves a conferee
from conference ROUTECONF to a conference in the
range ROUTESTART to ROUTEEND every second.
This movement occurs provided that the conference is
OPEN, has less than MAXCONF conferees, and at
least one 'consultant'. A consultant is a special
conferee with disabled AUTO DISCONNECT TIMER.
If AUTOROUTE = Y, auto routing is ON.
Start of range of conferences fed by AUTOROUTE.
End of range of conferences fed by AUTOROUTE.
Feeder conference for AUTOROUTE.
Maximum number of conferees, not including the
'consultant', for each AUTOROUTE target conference.
If ROUTE# != 0, # routing is enabled. When a
conferee hits '#', the system attempts to route him to
the next OPEN conference according to the
AUTOROUTE option.
If ROUTE* != 0, * routing is enabled. When a
conferee hits the '*', followed by up to three digits, the
system attempts to route him to the corresponding
conference as per the AUTOROUTE option.
3 of 5
53
January 2006
Advertisement
Table of Contents
