Table of Contents
Advertisement
Chapter 4: Configuring the Avaya Conference Management Server (CMS)
EMS configuration file (Emi.fil)
This file sets the parameters for communications between the CMS and the EMI card.
Application recording configuration file (Aprec.fil)
This file is read by the CMS at start up and sets the defaults for the application recording
functionality. For example, if a command, such as, ccl_trace, is set to "0", its output is not
recorded. If a command is set to "1", its output is recorded. While the CMS is running, changes
to application recording functionality can be made. When the CMS is reset, this file is read and
the defaults are reset in accordance with this file.
Call detail record configuration file (Cdr_ctrl.fil)
Cdr_ctrl.fil contains the sequence number of the next CDR file that the system opens
when the system fills the current CDR file. It is similar to numbers.fil as it holds sequence
numbers. However, numbers.fil represents a finer level of detail as it holds the statistics
record numbers that comprise the CDR files.
Hoot and holler configuration file (Hh.fil)
Hh.fil contains the names of hoot n' holler circuits. Each hoot n' holler circuit has a numeric
identifier. This identifier is stored in hh.fil.
Hoot and holler conferee configuration file (Hhconferee.fil)
At system start up, Hhconferee.fil directs particular hoot n' holler circuits to conferences.
Conferences are opened at system start up, based on the contents of conf.fil.
56
CS7000 System Administrator Guide for Release 9.4
January 2006
Advertisement
Table of Contents
