Defining Hoot And Holler Groups - Avaya CS7000 Administrator's Manual

Defining Hoot and Holler Groups

To define Hoot and Holler groups, System Administrators create a simple text file using
Notepad.exe. The text file must contain a section called Presets. The Presets section must
contain an entry for each group, in the following format:
<ID>=<list>
<ID> is a group identifier
●
<list> is a comma separated values list of Hoot and Holler circuits IDs
●
For example:
[Presets]
2=1,4,9
3=7,8,9,10
15=18,17,3,4,5,6
System Administrators must save this text file to a centralized location. Alternatively, the file can
be saved locally to the same directory as the Operator ini file. If the file is saved locally, System
Administrators must ensure that the exact same file is on all Operator workstations. For this
reason, Avaya recommend the centralized option.
Holler definition file.
Figure 115: Hoot and Holler Groups
CS7000 System Administrator Guide for Release 9.4
Configuring Hoot and Holler Groups
Figure 115 displays a sample Hoot and
233
January 2006