Table of Contents
Advertisement
Chapter 15: Administering the Avaya Operator Console
Configuring the Operator ini File
This section describes how to configure the Operator ini file. This section also describes some
new fields and Operator options that arise as a result of new features:
Operator Options
●
New Fields
●
To configure the Operator ini file, System Administrators set the HHGroups and HHParkID
parameters.
The HHGroups parameter specifies a path to the file that defines the Hoot and Holler groups.
For more information, see
The HHParkID parameter specifies a conference for unconnected Hoot and Holler groups. The
system uses this conference hold Hoot and Holler groups when they are not connected to their
group conference. Usually, the holding conference has a conference ID of 1. A conference ID of
1 ensures consistency with an existing configuration of a customer. It might be necessary to
reconfigure other elements in the Avaya CS7000 system.
Figure 116
displays a section from a sample Operator ini file.
Figure 116: Operator ini File
When the Hoot and Holler groups are defined and the Operator ini file is configured, a
conference must be opened for each Hoot and Holler group. The conference ID must be the
same as the group ID for the associated group.
When these administrative tasks are complete, several new options are made available to the
Operator on the Operator Console. For more information, see "Operator Options" on page 263.
In addition, new fields are made available in the Conference title bar and the Conference List
title bar.
234
CS7000 System Administrator Guide for Release 9.4
Defining Hoot and Holler Groups
on page 233.
January 2006
Advertisement
Table of Contents
