Avaya CS7000 Administrator's Manual page 259

Table 83: Settings (continued)
Parameter
BSTimeSyncMins
CrisisHold
DialHold
EmptyAtOneSecs
CS7000 System Administrator Guide for Release 9.4
Example Value
If BSTimeSyncMins is set to zero, time synchronization is
disabled.
If BSTimeSyncMins is set to non zero, it specifies the interval
time between Demand PIN Master and CRS synchronization.
The default value is 0.
The CrisisHold parameter ensures that the initiating call of a
crisis alert is placed on hold until one of the dialed calls is
answered. The CrisisHold parameter has four possible values:
0 = This feature is disabled.
The following values determine what happens to the call if the
conference closes:
1 = The call is left on hold.
2 = The call is routed to reception.
3 = The call is disconnected.
The default value is zero.
The DialHold parameter enables the Dial Hold Release feature
on any calls dialed from a participant list. The Dial Hold Release
feature is a voicemail filter.
If you set the EmptyAtOneSecs parameter to non zero, demand
conferences close if only one conferee remains for that number
of seconds. For example, if you set EmptyAtOneSecs to 180, the
demand conference closes if only a single conferee remains for a
period of three minutes.
By default, the EmptyAtOneSecs parameter is disabled:
EmptyAtOneSecs=0
Demand.ini
4 of 5
259
January 2006