Table of Contents
Advertisement
Primary rate interface configuration file (Pri.fil)
The file C:\C2001\data\pri.fil defines the configuration of the primary rate interface
(PRI) cards fitted in the system. It defines the location of the PRIs used in the shelf or shelves,
the individual card status, and the channel number. It also tells the CMS whether a hunt group
services the CMS and if so which one.
Note:
Channels 1 and 17 are unavailable on any PRI. This situation is always the case,
Note:
as these channels are required for signaling purposes.
Cnf configuration file (Cnf.fil)
The file c:\C2001\data\cnf.fil defines the configuration details of the CNF cards used in
the system. It specifies the location and status of each card. It also specifies the bridge
configuration and the bridge hunt group assignment for each bridge. It also lists the CNF
channel configuration and their assigned CNF hunt groups. Shelves...
16
●
17
●
18
●
19
●
20
●
...are virtual CNF resources. These virtual resources are the CNF resources used for reception
conferences.
LI3 configuration file (Li3.fil)
The file c:\C2001\data\LI3.fil defines the configuration details of the LI3 cards used in
the system. It specifies the location and status of each card and the LI3 channel configuration.
The LI3 card and the OI16 card are set up similarly.
CS7000 System Administrator Guide for Release 9.4
Primary rate interface configuration file (Pri.fil)
49
January 2006
Advertisement
Table of Contents
