Preparing Your System for Upgrade
Depending on the upgrade, you will need one or more of the following
tools:
T
Phillips screwdriver (#1 bit and #2 bit)
T
Flat-head screwdriver
T
Small needle nose pliers
T
Pen or pencil
T
ESD workstation or antistatic wrist strap (recommended)
Equipment Log
Use the equipment log form located at the end of this manual to record
the model and serial number of your system, all installed options, and
any other pertinent information specific to your system. You will need
this information when configuring your system.
4-4 Upgrading Your System