Install Water Outlet And Outlet Housing Assembly; Install No.2 Timing Belt Cover - Toyota 2L-T Repair Manual

Y "
ENGINE MECHANICAL
-
Cylinder Head (2L-T)
EM-45
9. (LN)
a
INSTALL VENTURI ASSEMBLY
(a)
Install the wire support with the two bolts.
(b) l nstall a new gasket and the venturi assembly.
(c) Connect the connector and vacuum hoses to the VSV.
10. INSTALL LH ENGINE HANGER
Torque: 380 kg-cm (27 ft-lb, 37 Nnm)
INSTALL WATER OUTLET AND OUTLET HOUSING
ASSEMBLY
(a)
l nstall a new gasket, the water outlet and outlet hous-
ing assembly with the three bolts.
Torque: 195kg-cm(14ft-lb,19N-m)
(b) Connect the by-pass hose to the thermo wax of the
injection pump.
(c) Connect the water temperature switch connector.
12. INSTALL NO. 2 TIMING BELT COVER
Install the timing belt cover with the four bolts.
Torque: 185 kg-cm (13 ft-lb, 18 N-m)
13. INSTALL CAMSHAFT TIMING PULLEY
14. INSTALL INJECTION NOZZLES
15. INSTALL INJECTION PUMP
(See steps 2 to 11 on pages FU-46 and 47)
16. INSTALL TIMING BELT
(See steps 12 to 18 on page FU-48)
17. INSTALL TURBOCHARGER
(See steps 3 to 8 on pages TC-13 and 14)
18. FILL WITH ENGINE COOLANT (See page CO-5)
19. START ENGINE AND CHECK FOR LEAKS
20. RECHECK ENGINE COOLANT LEVEL AND OIL
LEVEL