Installing The Server; Optional Components - Oracle Netra X5-2 Installation Manual

Installing the Server

These topics describe how to install the server into an equipment rack.
Step
1.
2.
3.
4.
Related Information
"Understanding the Server" on page 9
■
"Confirming Specifications" on page 17
■
"Preparing for Installation" on page 25
■
"Connecting Cables" on page 61
■
"Powering On the Server the First Time" on page 73
■

Optional Components

Optional components, such as additional memory or PCIe cards that were ordered as part of
the server, are installed in the server at the factory before the server is shipped. Any options
not ordered with the server are shipped separately. If possible, install these components prior to
installing the server in a rack.
Except for rackmount kits, if you ordered any options that are not factory-installed, refer to
the Netra Server X5-2 Service Manual
instructions.
Description
Install optional components.
Review cautions.
Stabilize the rack.
Install the server in a rack.
Links
"Optional Components" on page 29
"Handling Precautions" on page 26
"Stabilize the Rack" on page 31
■ "Installing the Standard 19-Inch Hardmount Kit (4-Post
Rack)" on page 31
■ "Installing the 19-Inch Sliding Rail Kit With the
CMA" on page 37
■ "Installing the 19-Inch Hardmount Kit (2-Post
Rack)" on page 52
and the component's documentation for installation
Installing the Server 29