Assemble The Dc Input Power Cord - Oracle Netra X5-2 Installation Manual

Assemble the DC Input Power Cord

Assemble the DC Input Power Cord
Assemble one DC input power cable for each DC power input to your server.
1. Verify that you have met these conditions:
a. Install a DC power source that meets the server's input power specifications.
See
b. Secure DC power cables that meet the server's power cabling specifications.
See
Attach the DC input plug to the DC input power cables. The input plug is
c.
provided in the server's shipping kit.
See
If the power cables are already connected to a DC power source, de-energize
2.
the cables by removing fuses, opening circuit breakers, or turning off the DC
source.
Caution -
present on the DC power cables.
3. Identify the parts that you will use to assemble the DC input power cables.
78 Netra Server X5-2 Installation Guide • June 2016
"Electrical Specifications" on page
"DC Power Source, Power Connection, and Grounding Requirements" on page
"Shipping Kit Inventory" on page
Do not proceed with these instructions until you are sure that there is no voltage
18.
25.
21.