Assembling Dc Power Cords And Applying Dc Power - Oracle Netra X5-2 Installation Manual

4. Connect the AC power cords to both power supplies.
When power is applied, the OK LED flashes while the SP initializes. After a few minutes, the
OK LED slowly flashes, indicating that the server is in standby power mode. See
Components (Installation)" on page
Power on the server.
5.
See "Power On the Host for the First Time" on page
Related Information
"Connect the Chassis Ground Wire" on page 76
■
"Power On the Host for the First Time" on page 83
■

Assembling DC Power Cords and Applying DC Power

These topics describe how to assemble DC power cords and apply power.
Assembling DC Power Cords and Applying DC Power
12. The server is not yet powered on.
83.
Powering On the Server the First Time
"Front Panel
75