Esd Precautions; Tools Needed For Installation - Oracle Netra X5-2 Installation Manual

"Optional Components" on page 29
■
"Rack Cautions" on page 30
■
"Stabilize the Rack" on page 31
■

ESD Precautions

Electronic equipment is susceptible to damage by static electricity. Use a grounded antistatic
wrist strap or foot strap, or equivalent safety equipment to prevent ESD when you install or
service the server.
Caution -
disable the server or require repair by service technicians, place components on an antistatic
surface, such as an antistatic discharge mat, an antistatic bag, or a disposable antistatic mat.
Wear an antistatic grounding strap connected to a metal surface on the chassis when you work
on server components.
Related Information
"Shipping Kit Inventory" on page 25
■
"Handling Precautions" on page 26
■
"Tools Needed for Installation" on page 27
■
"Optional Components" on page 29
■
"Rack Cautions" on page 30
■
"Stabilize the Rack" on page 31
■

Tools Needed for Installation

To install the server, you must have the following tools:
No. 2 Phillips screwdriver
■
ESD mat and grounding strap
■
For the initial installation configuration, you must provide a terminal device for use as a console
device. You can use these types of devices:
ASCII terminal
■
Workstation
■
Terminal server
■
To protect electronic components from electrostatic damage, which can permanently
ESD Precautions
Preparing for Installation 27