Installing The Server Into A Rack - Oracle Server X6-2 Installation Manual

Installing the Server Into a Rack

This section describes how to install the server into a rack using the rail assembly in the
rackmount kit.
In this guide, the term "rack" means either an open rack or a closed cabinet.
Note -
Description
Complete all installation prerequisite tasks.
Check that your rack meets the requirements
for installation of this server.
Review safety precautions.
Verify that you have received all components
of the rackmount kit.
Stabilize the rack.
Install mounting brackets onto the server.
Mark the rackmount location.
Attach the tool-less slide-rail assembly to the
rack.
Install the server into the slide-rail assembly.
(Optional) Install the cable management arm
for routing server cables.
(Optional) Install the Shipping Bracket With
Cable Trough for shipping the server in a rack.
Related Information
"Installation Procedure" on page 13
■
"Preparing for Server Installation" on page 15
■
Links
"Installation Prerequisites" on page 38
"Rack Requirements" on page 38
"Safety Precautions" on page 39
"Rackmount Kit Contents" on page 40
"Stabilize the Rack for Installation" on page 41
"Install Mounting Brackets Onto the Server" on page 42
"Mark the Rackmount Location" on page 43
"Attach Tool-less Slide-Rail Assemblies" on page 47
"Connect AC Power Cables Before Installing Tool-less Slide-Rails
in Sun Rack II 1042" on page 45
■ "Install the Cable Management Arm" on page 56
■ "Remove the Cable Management Arm" on page 66
"Install the Shipping Bracket With Cable Trough
(Optional)" on page 52
Installing the Server Into a Rack 37