Installing The Server Into A Rack; Installing Oracle Database Appliance X9-2-Ha Into A Rack - Oracle X9-2 Owner's Manual

Remove the front and rear doors of the rack cabinet if they interfere with the
2.
installation.
To prevent the rack cabinet from tipping during the installation, fully extend the
3.
rack cabinet's anti-tilt legs or anti-tilt bar, which are located at the bottom front of
the rack cabinet.
If there are leveling feet beneath the rack cabinet to prevent it from rolling, extend
4.
these leveling feet fully downward to the floor once the rack cabinet is where it will
reside in the data center.
When moving a rack cabinet to a different location, including repacking, verify that
5.
rack cabinet leveling feet are up before moving the rack cabinet.

Installing the Server Into a Rack

Tasks to complete to install Oracle Database Appliance into a rack.
Note:
The links in the following table take you to instructions outside of the Oracle
Database Appliance library to the Oracle Server X9-2 documentation library.
Use your browser's Back button to return to the Oracle Database Appliance
library.
Oracle Database Appliance X9-2S
Verify Rackmount Hardware
Install Mounting Brackets
Mark the Rackmount Location
Connect AC Power Cables and Slide-Rails
Attach the Tool-less Slide-Rail Assemblies
Install the Server into the Slide-Rail
Assemblies
Install the Cable Management Arm and Verify
Operation

Installing Oracle Database Appliance X9-2-HA Into a Rack

Procedures describing how to install Oracle Database Appliance X9-2-HA into a rack.
Caution:
System Failure. Oracle Database Appliance is shipped with matched sets of
components that must be installed together. Mixing components from
different systems might cause the system to fail.
• Contents of the Shipping Container
A listing of the ship container contents of Oracle Database Appliance X9-2-HA.
Installing the System Into a Rack
Oracle Database Appliance X9-2L
Verify Rackmount Hardware
Install Mounting Brackets
Mark the Rackmount Location
Connect AC Power Cables and Slide-Rails
Attach the Tool-less Slide-Rail Assemblies
Install the Server into the Slide-Rail
Assemblies
Install the Cable Management Arm and Verify
Operation
Chapter 4
4-8