Oracle Netra X5-2 Installation Manual page 84

Power On the Host for the First Time
4. Power on the server and redirect the host output to display on the serial terminal
device.
-> start /System
Are you sure you want to start /SYS (y/n)? y
Starting /System
-> start /HOST/console
Are you sure you want to start /HOST/CONSOLE (y/n)? y
Serial console started. To stop, type #.
. . .
After you start the host console, the server initialization takes up to 20 minutes, depending on
your system configuration, to complete and the server boots.
After the server boots, the GRUB menu appears, providing prompts to install the preinstalled
OS.
GNU GRUB Version 0.97 (607K lower / 2087168K)
s11_2011.11_a - Serial Port (ttya)
s11_2011.11_a - Graphics Adapter
From the GRUB menu, you can choose whether you want to continue to direct the display to
the serial port, or whether you want to direct the display to a device connected to the video port.
Note -
on the GRUB menu, after 10 seconds, the GRUB menu is no longer available, and the system
continues with the output directed to the serial port.
5. Either configure the preinstalled OS, or install and configure a different OS on
the server.
To install an OS on the Netra Server X5-2 from Oracle, refer to the
Operating System Installation
Related Information
"Connect AC Power Cords" on page 73
■
"Assembling DC Power Cords and Applying DC Power" on page 75
■
84 Netra Server X5-2 Installation Guide • June 2016
By default, the system displays the output to the serial port. If you do not select an option
Guide.
Netra Server X5-2