Installing The Storage Server Into A Rack; Installation Prerequisites - Oracle X6-2 Installation Manual

Installing the Storage Server Into a Rack

This section describes how to install the storage server into a rack using the rail assembly in the
rackmount kit. Perform these procedures if you are inserting additional storage servers into your
Exadata Database Machine configuration.
Description
Complete all installation prerequisite tasks.
Review safety precautions.
Review ESD precautions.
Verify that you have received all components
in the rackmount kit.
Gather the tools and equipment needed to
install the storage server into a rack.
Install the storage server into the rack.
Related Information
"About Rack Installation" on page 19
■
"System Specifications" on page 15
■

Installation Prerequisites

Ensure that the following tasks are complete before you start the rackmount procedures:
Read the Oracle Exadata Storage Server Extreme Flash Safety and Compliance Guide and
■
the Important Safety Information for Oracle Hardware Systems.
Ensure that your site meets the required electrical and environmental requirements. See
■
"System Specifications" on page
Links
"Installation Prerequisites" on page 25
"Safety Precautions When Rackmounting the Storage
Server" on page 26
"ESD Precautions" on page 27
"Rackmount Kit Contents" on page 28
"Tools and Equipment Needed for Installation" on page 27
"Install the Storage Server Into the Rack" on page 28
15.
Installing the Storage Server Into a Rack 25