Table of Contents
Advertisement
Installing the Server
These topics describe how to install the server into a rack using the rail assembly in the
rackmount kit. Perform these procedures if you purchased the rail assembly.
Note -
Step
Description
1.
Install optional components.
2.
Ensure that your rack is compatible with the server
requirements.
3.
Review the cautions for working with racks.
4.
Use anti-tilt mechanisms to ensure that the rack does
not tip when the server is installed.
5.
Prepare the slide rails, mounting brackets, and slide rail
assemblies for server installation.
6.
Install the server in the rack.
7.
(Optional) Install the CMA.
Related Information
"Preparing for Installation" on page 15
■
"Connect Cables" on page 51
■
Optional Components
Optional components, such as additional memory or PCIe cards that were ordered as part of
the server, are installed in the server at the factory before the server is shipped. Any options
In this guide, the term rack means either an open rack or a closed cabinet.
Links
"Optional Components" on page 25
"Rack Compatibility" on page 26
"Rack Cautions" on page 27
"Stabilize the Rack" on page 28
"Install the Rackmount Hardware" on page 29
"Attach Slide Rail Assemblies to the Rack" on page 31
"Install the Server Into the Slide Rail Assemblies" on page 35
"Attach the CMA to the Server" on page 41
Installing the Server
25
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T8-1 and is the answer not in the manual?