Installing Windows Server On A Single System Using Oracle System Assistant; Install Windows Server On A Single System Using Oracle System Assistant - Oracle Server X5-2 Installation Manual

Installing Windows Server on a Single System Using Oracle System Assistant

Verify that the UEFI firmware settings are set to the optimal defaults. For instructions
■
on how to verify and, if necessary, set the UEFI firmware settings, see
Optimal Defaults" on page
Set the UEFI firmware to the desired boot mode, Legacy BIOS or UEFI. For instructions on
■
how to set the UEFI boot mode, see
The console display option is selected and set up prior to performing the installation. For
■
more information about this option and setup instructions, see
Display Option" on page
The boot media option is selected and set up prior to performing the installation. For
■
more information about this option and setup instructions, see
Option" on page
The storage drive to be used as the installation target option is selected and set up prior to
■
performing the installation. For more information about this option and setup instructions,
see
Gather the Microsoft Windows Server 2012 or Windows Server 2012 R2 operating system
■
documentation so that you can use it in conjunction with the Windows Server operating
system instructions provided in this section. You can obtain a copy of Microsoft Windows
Server 2012 and 2012 R2 installation documentation at:
en-us/windowsserver/default.aspx.
Installing Windows Server on a Single System Using Oracle
System Assistant
The Oracle System Assistant application's Install OS task is the recommended method for
installing a supported Microsoft Windows Server OS on the server.
"Install Windows Server on a Single System Using Oracle System
■
Assistant" on page 34
Install Windows Server on a Single System Using
Oracle System Assistant
Perform the steps in
■
Before You Begin
System" on page
If you want to configure the boot drive (that is, the storage drive onto which you are
■
installing the Windows Server OS) for RAID, you must do so before you install the OS.
For instructions on how to configure RAID on your server, refer to
Requirements" in Oracle Server X5-2 Installation
34 Oracle Server X5-2 Installation Guide for Windows Server Operating Systems • April 2016
26.
12.
14.
"Selecting the Installation Target Option" on page
"Preparing to Install the Windows Server Operating
25.
"Set the Boot Mode" on page
19.
http://technet.microsoft.com/
Guide.
"Verify the UEFI
28.
"Selecting the Console
"Selecting the Boot Media
"RAID Configuration