Paula Deen kitchen electrics PDPC8 Instruction Manual & Recipes page 17

TROUBLE S HOOTING
Problem
It is difficult to close the
lid.
It is difficult to open the
lid.
Steam is leaking from the
lid.
Steam is leaking from the
float valve.
The float valve will not
rise.
Reason
The sealing ring is out of
place.
The float valve is stuck in
the push rod.
After releasing, the float
valve has not gone down.
The sealing ring is out of
place.
There is food residue on
the sealing ring.
There is an abrasion on
the sealing ring.
The cover is not properly
placed.
There is food residue on
the sealing ring.
There is an abrasion on
the sealing ring or the
float valve.
The float valve cannot
align with the position of
the sealing.
There is not enough food
or liquid in the pot.
Steam is leaking from the
lid or the float valve.
Solution
Place the sealing circle
properly.
Push the rod in place.
Press the float valve
down.
Install the sealing ring
properly.
Clean the sealing ring
after every use.
Replace the sealing ring.
Close the lid properly.
Clean the sealing ring
after every use.
Replace the sealing ring
or float valve.
Set the float valve to the
right position.
Place enough liquid or
food inside the pot.
Please see points above
about the lid or float valve
leaking.
17