Table of Contents
Advertisement
Chapter 40: LLDP Commands
lldp basic-tlv
port-description
lldp basic-tlv
system-capabilities
lldp basic-tlv
system-description
This command configures an LLDP-enabled port to advertise its port
description. Use the no form to disable this feature.
S
YNTAX
[no] lldp basic-tlv port-description
D
S
EFAULT
ETTING
Enabled
C
M
OMMAND
ODE
Interface Configuration (Ethernet, Port Channel)
C
U
OMMAND
SAGE
The port description is taken from the ifDescr object in RFC 2863, which
includes information about the manufacturer, the product name, and the
version of the interface hardware/software.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv port-description
Console(config-if)#
This command configures an LLDP-enabled port to advertise its system
capabilities. Use the no form to disable this feature.
S
YNTAX
[no] lldp basic-tlv system-capabilities
D
S
EFAULT
ETTING
Enabled
C
M
OMMAND
ODE
Interface Configuration (Ethernet, Port Channel)
C
U
OMMAND
SAGE
The system capabilities identifies the primary function(s) of the system and
whether or not these primary functions are enabled. The information
advertised by this TLV is described in IEEE 802.1AB.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-capabilities
Console(config-if)#
This command configures an LLDP-enabled port to advertise the system
description. Use the no form to disable this feature.
– 1252 –
Advertisement
Table of Contents
