Table of Contents
Advertisement
Chapter 40: LLDP Commands
lldp basic-tlv
system-name
lldp dot1-tlv
proto-ident
S
YNTAX
[no] lldp basic-tlv system-description
D
S
EFAULT
ETTING
Enabled
C
M
OMMAND
ODE
Interface Configuration (Ethernet, Port Channel)
C
U
OMMAND
SAGE
The system description is taken from the sysDescr object in RFC 3418,
which includes the full name and version identification of the system's
hardware type, software operating system, and networking software.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-description
Console(config-if)#
This command configures an LLDP-enabled port to advertise the system
name. Use the no form to disable this feature.
S
YNTAX
[no] lldp basic-tlv system-name
D
S
EFAULT
ETTING
Enabled
C
M
OMMAND
ODE
Interface Configuration (Ethernet, Port Channel)
C
U
OMMAND
SAGE
The system name is taken from the sysName object in RFC 3418, which
contains the system's administratively assigned name, and is in turn based
on the
hostname
command.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv system-name
Console(config-if)#
This command configures an LLDP-enabled port to advertise the supported
protocols. Use the no form to disable this feature.
S
YNTAX
[no] lldp
dot1-tlv proto-ident
– 1253 –
Advertisement
Table of Contents
