Supermicro SSE-G2252 User Manual page 1205

Chapter 39: Multicast Filtering Commands
MVR for IPv4
show mvr interface
E
XAMPLE
The following displays the profiles bound to domain 1:
Console#show mvr domain 1 associated-profile
Domain ID : 1
MVR Profile Name Start IP Addr.
-------------------- --------------- ---------------
rd
testing
Console#
This command shows MVR configuration settings for interfaces attached to
the MVR VLAN.
S
YNTAX
show mvr [domain domain-id] interface
domain-id - An independent multicast domain. (Range: 1-5)
D S
EFAULT ETTING
Displays configuration settings for all attached interfaces.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
The following displays information about the interfaces attached to the
MVR VLAN in domain 1:
Console#show mvr domain 1 interface
MVR Domain : 1
Flag: H - immediate leave by host ip
Port Type
-------- --------
Eth 1/ 1 Source Active/Forwarding
Eth 1/ 2 Receiver Inactive/Discarding
Eth 1/ 3 Source Inactive/Discarding
Eth 1/ 1 Receiver Active/Forwarding
Eth1/ 4 Receiver Active/Discarding
Console#
Table 39-13: show mvr interface - display description
Field Description
MVR Domain An independent multicast domain.
Port Shows interfaces attached to the MVR.
Type Shows the MVR port type.
– 1218 –
End IP Addr.
228.1.23.1 228.1.23.10
228.2.23.1 228.2.23.10
Status Immediate
------------- ---------
Disabled
Disabled
Disabled
Static Group Address
--------------------
234.5.6.8(VLAN2)
225.0.0.1(VLAN1)
225.0.0.9(VLAN3)