Table of Contents
Advertisement
Chapter 22: Remote Monitoring Commands
rmon event
E
XAMPLE
Console(config)#rmon alarm 1 1 1.3.6.1.2.1.16.1.1.1.6.1 15 delta
rising-threshold 100 1 falling-threshold 30 1 owner mike
Console(config)#
This command creates a response event for an alarm. Use the no form to
remove an event.
S
YNTAX
rmon event index [log] | [trap community] | [description string] |
[owner name]
no rmon event index
index – Index to this entry. (Range: 1-65535)
log – Generates an RMON log entry when the event is triggered.
Log messages are processed based on the current configuration
settings for event logging (see
trap – Sends a trap message to all configured trap managers (see
the
snmp-server host
community – A password-like community string sent with the trap
operation to SNMP v1 and v2c hosts. Although this string can be set
using the rmon event command by itself, it is recommended that
the string be defined using the
prior to using the rmon event command. (Range: 1-127 characters)
string – A comment that describes this event. (Range: 1-127
characters)
name – Name of the person who created this entry. (Range: 1-127
characters)
D
S
EFAULT
ETTING
None
C
M
OMMAND
ODE
Global Configuration
C
U
OMMAND
SAGE
•
If an event is already defined for an index, the entry must be deleted
before any changes can be made with this command.
The specified events determine the action to take when an alarm
•
triggers this event. The response to an alarm can include logging the
alarm or sending a message to a trap manager.
E
XAMPLE
Console(config)#rmon event 2 log description urgent owner mike
Console(config)#
– 747 –
"Event Logging" on page
command).
snmp-server community
688).
command
Advertisement
Table of Contents
