Table of Contents
Advertisement
Chapter 40: LLDP Commands
lldp dot1-tlv
proto-vid
lldp dot1-tlv pvid
D
S
EFAULT
ETTING
Enabled
C
M
OMMAND
ODE
Interface Configuration (Ethernet, Port Channel)
C
U
OMMAND
SAGE
This option advertises the protocols that are accessible through this
interface.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-ident
Console(config-if)#
This command configures an LLDP-enabled port to advertise port-based
protocol VLAN information. Use the no form to disable this feature.
S
YNTAX
[no] lldp dot1-tlv proto-vid
D
S
EFAULT
ETTING
Enabled
C
M
OMMAND
ODE
Interface Configuration (Ethernet, Port Channel)
C
U
OMMAND
SAGE
This option advertises the port-based protocol VLANs configured on this
interface (see
"Configuring Protocol-based VLANs" on page
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-vid
Console(config-if)#
This command configures an LLDP-enabled port to advertise its default
VLAN ID. Use the no form to disable this feature.
S
YNTAX
[no] lldp dot1-tlv pvid
D
S
EFAULT
ETTING
Enabled
– 1254 –
1106).
Advertisement
Table of Contents
