Supermicro SSE-G2252 User Manual page 1011

Chapter 34: Spanning Tree Commands
spanning-tree
hello-time
spanning-tree
max-age
E
XAMPLE
Console(config)#spanning-tree forward-time 20
Console(config)#
This command configures the spanning tree bridge hello time globally for
this switch. Use the no form to restore the default.
S
YNTAX
spanning-tree hello-time time
no spanning-tree hello-time
time - Time in seconds. (Range: 1-10 seconds).
The maximum value is the lower of 10 or [(max-age / 2) - 1].
D S
EFAULT ETTING
2 seconds
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
This command sets the time interval (in seconds) at which the root device
transmits a configuration message.
E
XAMPLE
Console(config)#spanning-tree hello-time 5
Console(config)#
R C
ELATED OMMANDS
spanning-tree forward-time (1023)
spanning-tree max-age (1024)
This command configures the spanning tree bridge maximum age globally
for this switch. Use the no form to restore the default.
S
YNTAX
spanning-tree max-age seconds
no spanning-tree max-age
seconds - Time in seconds. (Range: 6-40 seconds)
The minimum value is the higher of 6 or [2 x (hello-time + 1)].
The maximum value is the lower of 40 or [2 x (forward-time - 1)].
D S
EFAULT ETTING
20 seconds
– 1024 –