Supermicro SSE-G2252 User Manual page 1204

Chapter 39: Multicast Filtering Commands
MVR for IPv4
show mvr
associated-profile
Console#show mvr
MVR 802.1p Forwarding Priority : Disabled
MVR Proxy Switching
MVR Robustness Value
MVR Proxy Query Interval
MVR Source Port Mode
MVR Domain
MVR Config Status
MVR Running Status
MVR Multicast VLAN
MVR Current Learned Groups
MVR Upstream Source IP
.
.
.
Table 39-12: show mvr - display description
Field Description
MVR 802.1p Forwarding Priority assigned to multicast traffic forwarded into the MVR VLAN
Priority
MVR Proxy Switching Shows if MVR proxy switching is enabled
MVR Robustness Value Shows the number of reports or query messages sent when proxy
switching is enabled
MVR Proxy Query Interval The interval at which the receiver port sends out general queries
MVR Source Port Mode Shows if the switch only forwards multicast streams which the
source port has dynamcially joined or always forwards multicast
streams
MVR Domain An independent multicast domain.
MVR Config Status Shows if MVR is globally enabled on the switch.
MVR Running Status Indicates whether or not all necessary conditions in the MVR
environment are satisfied. (Running status is true as long as MVR
Status is enabled, and the specified MVR VLAN exists.)
MVR Multicast VLAN Shows the VLAN used to transport all MVR multicast traffic.
MVR Current Learned The current number of MVR group addresses
Groups
MVR Upstream Source IP The source IP address assigned to all upstream control packets.
This command shows the profiles bound the specified domain.
S
YNTAX
show mvr [domain domain-id] associated-profile
domain-id - An independent multicast domain. (Range: 1-5)
D S
EFAULT ETTING
Displays profiles bound to all MVR domains.
C M
OMMAND ODE
Privileged Exec
– 1217 –
: Enabled
: 1
: 125(sec.)
: Always Forward
: 1
: Enabled
: Active
: 1
: 10
: 192.168.0.3