Supermicro SSE-G2252 User Manual page 1163

Chapter 39: Multicast Filtering Commands
IGMP Filtering and Throttling
permit, deny
S
YNTAX
[no] ip igmp profile profile-number
profile-number - An IGMP filter profile number.
(Range: 1-4294967295)
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
A profile defines the multicast groups that a subscriber is permitted or
denied to join. The same profile can be applied to many interfaces, but only
one profile can be assigned to one interface. Each profile has only one
access mode; either permit or deny.
E
XAMPLE
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#
This command sets the access mode for an IGMP filter profile. Use the no
form to delete a profile number.
S
YNTAX
{permit | deny}
D S
EFAULT ETTING
Deny
C M
OMMAND ODE
IGMP Profile Configuration
C U
OMMAND SAGE
Each profile has only one access mode; either permit or deny.
•
When the access mode is set to permit, IGMP join reports are
•
processed when a multicast group falls within the controlled range.
When the access mode is set to deny, IGMP join reports are only
processed when a multicast group is not in the controlled range.
E
XAMPLE
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#permit
Console(config-igmp-profile)#
– 1176 –