Supermicro SSE-G2252 User Manual page 1156

Chapter 39: Multicast Filtering Commands
IGMP Snooping
show ip igmp
snooping group
VLAN 1:
--------
IGMP Snooping
IGMP Snooping Running Status
Version
Version Exclusive
Immediate Leave
Last Member Query Interval
Last Member Query Count
General Query Suppression
Query Interval
Query Response Interval
Proxy Query Address
Proxy Reporting
Multicast Router Discovery
VLAN Static Group Port
---- --------------- --------
1 224.1.1.1 Eth 1/ 1
.
.
.
This command shows known multicast group, source, and host port
mappings for the specified VLAN interface, or for all interfaces if none is
specified.
S
YNTAX
show ip igmp snooping group [host-ip-addr ip-address interface |
igmpsnp | sort-by-port | user | vlan vlan-id [user | igmpsnp]]
ip-address - IP address for multicast group
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
port-channel channel-id (Range: 1-16)
igmpsnp - Display only entries learned through IGMP snooping.
sort-by-port - Display entries sorted by port.
user - Display only the user-configured multicast entries.
vlan-id - VLAN ID (1-4094)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
– 1169 –
: Enabled
: Inactive
: Using global Version (2)
: Using global status (Disabled)
: Disabled
: 10 (unit: 1/10s)
: 2
: Disabled
: 125
: 100 (unit: 1/10s)
: 0.0.0.0
: Using global status (Disabled)
: Disabled