Table of Contents
Advertisement
Chapter 39: Multicast Filtering Commands
MVR for IPv4
show mvr profile
Console#show mvr domain 1 members
MVR Domain : 1
MVR Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts joined to group on this port).
P - Port counts (number of ports joined to group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address
VLAN Port
--------------- ---- ----------- ----------- ------ --------
234.5.6.7
1
1 Eth 1/ 1(S)
2 Eth 1/ 2(R)
Console#
The following example shows detailed information about a specific
multicast address:
Console#show mvr domain 1 members 234.5.6.7
MVR Domain : 1
MVR Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts joined to group on this port).
P - Port counts (number of ports joined to group).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address
VLAN Port
--------------- ---- ----------- ----------- ------ --------
234.5.6.7
1
1 Eth 1/ 1(S)
2 Eth 1/ 2(R)
Console#
Table 39-14: show mvr members - display description
Field
Description
Group Address
Multicast group address.
VLAN
VLAN to which this address is forwarded.
Port
Port to which this address is forwarded.
Uptime
Time that this multicast group has been known.
Expire
The time until this entry expires.
Count
The number of times this address has been learned by IGMP
snooping.
This command shows all configured MVR profiles.
C
M
OMMAND
ODE
Privileged Exec
– 1220 –
Up time
Expire Count
00:00:09:17
2(P)
Up time
Expire Count
2(P)
Advertisement
Table of Contents
