Table of Contents
Advertisement
Chapter 39: Multicast Filtering Commands
MVR for IPv4
clear mrv statistics
show mvr
C
U
OMMAND
SAGE
This command only clears entries learned though MRV. Statically
configured multicast address are not cleared.
E
XAMPLE
Console#clear mrv groups dynamic
Console#
This command clears MRV statistics.
S
YNTAX
clear mrv statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
port-channel channel-id (Range: 1-16)
vlan vlan-id - VLAN identifier (Range: 1-4094)
C
M
OMMAND
ODE
Privileged Exec
E
XAMPLE
Console#clear ip igmp snooping statistics
Console#
This command shows information about MVR domain settings, including
MVR operational status, the multicast VLAN, the current number of group
addresses, and the upstream source IP address.
S
YNTAX
show mvr [domain domain-id]
domain-id - An independent multicast domain. (Range: 1-5)
D
S
EFAULT
ETTING
Displays configuration settings for all MVR domains.
C
M
OMMAND
ODE
Privileged Exec
E
XAMPLE
The following shows the MVR settings:
– 1216 –
Advertisement
Table of Contents
