Priority Commands (Layer 3 And 4) - Supermicro SSE-G2252 User Manual

Chapter 37: Class of Service Commands

Priority Commands (Layer 3 and 4)

show queue weight
P C
RIORITY OMMANDS
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show queue mode
Queue Mode : Weighted Round Robin Mode
Console#
This command displays the weights used for the weighted queues.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show queue weight
Queue ID Weight
-------- ------
0 1
1 2
2 4
3 6
Console#
(L 3 4)
AYER AND
This section describes commands used to configure Layer 3 and 4 traffic
priority mapping on the switch.
Table 37-3: Priority Commands (Layer 3 and 4)
Command Function
qos map cos-dscp Maps CoS/CFI values in incoming packets to per-hop
behavior and drop precedence values for internal
priority processing
qos map dscp-mutation Maps DSCP values in incoming packets to per-hop
behavior and drop precedence values for internal
priority processing
qos map phb-queue Maps internal per-hop behavior values to hardware
queues
qos map trust-mode Sets QoS mapping to DSCP or CoS
show qos map cos-dscp Shows ingress CoS to internal DSCP map
show qos map dscp- Shows ingress DSCP to internal DSCP map
mutation
show qos map phb-queue Shows internal per-hop behavior to hardware queue
map
– 1125 –
Mode
GC
GC
GC
IC
PE
PE
PE