Table of Contents
Advertisement
Chapter 39: Multicast Filtering Commands
MVR for IPv4
show mvr members
Table 39-13: show mvr interface - display description (Continued)
Field
Description
Status
Shows the MVR status and interface status. MVR status for source
ports is "ACTIVE" if MVR is globally enabled on the switch. MVR
status for receiver ports is "ACTIVE" only if there are subscribers
receiving multicast traffic from one of the MVR groups, or a
multicast group has been statically assigned to an interface. Also
shows if MVR traffic is being forwarded or discarded.
Immediate
Shows if immediate leave is enabled or disabled.
Static Group Address
Shows any static MVR group assigned to an interface, and the
receiver VLAN.
This command shows information about the current number of entries in
the forwarding database, detailed information about a specific multicast
address, the IP address of the hosts subscribing to all active multicast
groups, or the multicast groups associated with each port.
S
YNTAX
show mvr [domain domain-id] members [ip-address |
host-ip-address [interface] | igmp | sort-by-port [interface] |
unknown | user]
domain-id - An independent multicast domain. (Range: 1-5)
ip-address - IPv4 address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
members - The multicast groups assigned to the MVR VLAN.
host-ip-address - The subscriber IP addresses.
igmp - Entry created by IGMP protocol.
sort-by-port - The multicast groups associated with an interface.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
port-channel channel-id (Range: 1-16)
unknown - Entry created by receiving a multicast stream.
user - Snooping entry learned from user's configuration settings.
D
S
EFAULT
ETTING
Displays configuration settings for all domains and all forwarding entries.
C
M
OMMAND
ODE
Privileged Exec
E
XAMPLE
The following shows information about the number of multicast forwarding
entries currently active in domain 1:
– 1219 –
Advertisement
Table of Contents
