Supermicro SSE-G2252 User Manual page 1141

Chapter 39: Multicast Filtering Commands
IGMP Snooping
ip igmp snooping
proxy-reporting
ip igmp snooping
querier
E
XAMPLE
Console(config)#ip igmp snooping priority 6
Console(config)#
R C
ELATED OMMANDS
show ip igmp snooping (1168)
This command enables IGMP Snooping with Proxy Reporting. Use the no
form to restore the default setting.
S
YNTAX
[no] ip igmp snooping proxy-reporting
ip igmp snooping vlan vlan-id proxy-reporting {enable | disable}
no ip igmp snooping vlan vlan-id proxy-reporting
vlan-id - VLAN ID (Range: 1-4094)
enable - Enable on the specified VLAN.
disable - Disable on the specified VLAN.
D S
EFAULT ETTING
Global: Disabled
VLAN: Based on global setting
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
When proxy reporting is enabled with this command, the switch
•
performs "IGMP Snooping with Proxy Reporting" (as defined in DSL
Forum TR-101, April 2006), including last leave, and query
suppression. Last leave sends out a proxy query when the last member
leaves a multicast group, and query suppression means that specific
queries are not forwarded from an upstream multicast router to hosts
downstream from this device.
If the IGMP proxy reporting is configured on a VLAN, this setting takes
•
precedence over the global configuration.
E
XAMPLE
Console(config)#ip igmp snooping proxy-reporting
Console(config)#
This command enables the switch as an IGMP querier. Use the no form to
disable it.
– 1154 –