Supermicro SSE-G2252 User Manual page 1169

Chapter 39: Multicast Filtering Commands
IGMP Filtering and Throttling
show ip igmp
authentication
show ip igmp filter
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#ip multicast-data-drop
Console(config-if)#
This command displays the interface settings for IGMP authentication.
S
YNTAX
show ip igmp authentication interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
port-channel channel-id (Range: 1-16)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
Using this command without specifying an interface displays information
for all interfaces.
E
XAMPLE
Console#show ip igmp authentication
Ethernet 1/1: Enabled
Ethernet 1/2: Enabled
Ethernet 1/3: Enabled
.
.
.
Ethernet 1/27: Enabled
Ethernet 1/28: Enabled
Console#
This command displays the global and interface settings for IGMP filtering.
S
YNTAX
show ip igmp filter [interface interface]
– 1182 –