Table of Contents
Advertisement
Chapter 40: LLDP Commands
lldp refresh-interval
lldp reinit-delay
E
XAMPLE
Console(config)#lldp notification-interval 30
Console(config)#
This command configures the periodic transmit interval for LLDP
advertisements. Use the no form to restore the default setting.
S
YNTAX
lldp refresh-interval seconds
no lldp refresh-delay
seconds - Specifies the periodic interval at which LLDP
advertisements are sent. (Range: 5 - 32768 seconds)
D
S
EFAULT
ETTING
30 seconds
C
M
OMMAND
ODE
Global Configuration
E
XAMPLE
Console(config)#lldp refresh-interval 60
Console(config)#
This command configures the delay before attempting to re-initialize after
LLDP ports are disabled or the link goes down. Use the no form to restore
the default setting.
S
YNTAX
lldp reinit-delay seconds
no lldp reinit-delay
seconds - Specifies the delay before attempting to re-initialize LLDP.
(Range: 1 - 10 seconds)
D
S
EFAULT
ETTING
2 seconds
C
M
OMMAND
ODE
Global Configuration
C
U
OMMAND
SAGE
When LLDP is re-initialized on a port, all information in the remote systems
LLDP MIB associated with this port is deleted.
– 1249 –
Advertisement
Table of Contents
