Table of Contents
Advertisement
Chapter 39: Multicast Filtering Commands
MVR for IPv4
mvr
associated-profile
mvr domain
C
U
OMMAND
SAGE
Only IGMP version 2 or 3 hosts can issue multicast join or leave messages.
If MVR must be configured for an IGMP version 1 host, the multicast
groups must be statically assigned using the
E
XAMPLE
The following example enables MVR globally.
Console(config)#mvr
Console(config)#
This command binds the MVR group addresses specified in a profile to an
MVR domain. Use the no form of this command to remove the binding.
S
YNTAX
[no] mvr domain domain-id associated-profile profile-name
domain-id - An independent multicast domain. (Range: 1-5)
profile-name - The name of a profile containing one or more MVR
group addresses. (Range: 1-21 characters)
D
S
EFAULT
ETTING
Disabled
C
M
OMMAND
ODE
Global Configuration
E
XAMPLE
The following an MVR group address profile to domain 1:
Console(config)#mvr domain 1 associated-profile rd
Console(config)#
R
C
ELATED
OMMANDS
mvr profile (1207)
This command enables Multicast VLAN Registration (MVR) for a specific
domain. Use the no form of this command to disable MVR for a domain.
S
YNTAX
[no] mvr domain domain-id
domain-id - An independent multicast domain. (Range: 1-5)
D
S
EFAULT
ETTING
Disabled
– 1206 –
mvr vlan group
command.
Advertisement
Table of Contents
