Table of Contents
Advertisement
Chapter 39: Multicast Filtering Commands
IGMP Snooping
clear ip igmp
snooping groups
dynamic
clear ip igmp
snooping statistics
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-52)
port-channel channel-id (Range: 1-16)
D
S
EFAULT
ETTING
None
C
M
OMMAND
ODE
Global Configuration
C
U
OMMAND
SAGE
Static multicast entries are never aged out.
•
When a multicast entry is assigned to an interface in a specific VLAN,
•
the corresponding traffic can only be forwarded to ports within that
VLAN.
E
XAMPLE
The following shows how to statically configure a multicast group on a port.
Console(config)#ip igmp snooping vlan 1 static 224.0.0.12 ethernet 1/5
Console(config)#
This command clears multicast group information dynamically learned
through IGMP snooping.
S
YNTAX
clear ip igmp snooping groups dynamic
C
M
OMMAND
ODE
Privileged Exec
C
U
OMMAND
SAGE
This command only clears entries learned though IGMP snooping. Statically
configured multicast address are not cleared.
E
XAMPLE
Console#clear ip igmp snooping groups dynamic
Console#
This command clears IGMP snooping statistics.
– 1167 –
Advertisement
Table of Contents
