Bcd Type Sin Operation - Mitsubishi Electric MELSEC-Q/L Programming Manual

Hide thumbs Also See for MELSEC-Q/L:

Table of Contents

BCD type SIN operation

(S): Data of which the SIN (sine) value is obtained or the number of the device where the data is stored (BCD 4 digits)

(D): Head number of the devices where the operation result will be stored (BCD 4 digits)

Internal device

Processing details

• Calculates the SIN (sine) value of value (angle) designated by (S), and stores the sign of the operation result in the device

designated at (D), and the operation result in the devices designated at (D)+1 and (D)+2.

• The value designated at (S) is a BCD value which can be between 0 and 360 degrees (in units of degrees).

• The sign for the operation result stored in (D) will be "0" if the result is a positive value, and "1" if the result is a negative

• The operation results stored in (D)+1 and (D)+2 are BCD values within the range of -1.0000 and 1.0000.

• Operation results are rounded off to four decimal places.

Operation error

• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.

Error details

The data specified in (S) is not a BCD value.

The data specified in (S) is not within the range from 0 to 360.

The points of the device specified in (D) exceeds those of the corresponding

7 APPLICATION INSTRUCTIONS

7.12 Special Function Instructions

Redundant Universal

Integer part

Decimal fraction part