Mitsubishi Electric MELSEC-Q/L Programming Manual page 762

Hide thumbs Also See for MELSEC-Q/L:

Table of Contents

• If n=12340 is specified, the data will be written to the lower 8 bits of ZR6170.

Write destination

• If n=43257 is specified, the data will be written to the upper 8 bits of ZR21628.

Write destination

Operation error

• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.

Error details

The specified device number (serial byte number) exceeds the available

Program example

• The following program writes the data at the lower bits of D100 and D101 to the lower 8 bits of ZR16000 and the upper 8

bits of ZR16003 when X0 is turned ON.

[Ladder Mode]

Serial byte No. 32000

(Lower 8 bits of ZR16000)

Serial byte No. 32007

(Upper 8 bits of ZR16003)

7 APPLICATION INSTRUCTIONS

7.19 Other Instructions