Mitsubishi Electric MELSEC-Q/L Programming Manual page 288

Hide thumbs Also See for MELSEC-Q/L:

Table of Contents

Operation error

• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.

Error details

The data of (S) is other than 0 to 32767 when the GBIN instruction is

The data of (S) is other than 0 to 2147483647 when the DGBIN instruction is

Program example

• The following program converts the Gray code data at D100 when X10 is ON to BIN data, and stores the result at D200.

[Ladder Mode]

• The following program converts the Gray code data at D10 and D11 to BIN data when X1C is ON, and stores the result at

[Ladder Mode]

6 BASIC INSTRUCTIONS

6.3 Data Conversion Instructions