Reading module model name
TYPERD(P)
High
Basic
Process
Redundant
performance
• Universal model QCPU: The serial number (first five digits) is "11043" or later.
TYPERD
TYPERDP
Setting
Internal device
data
Bit
Word
n
(D)
Setting data
Setting
Description
data
n
Value obtained by dividing the start I/O number of a module whose
model name is to be read by 16
(D)
(D)+0
(D)+1 to (D)+9
Processing details
• This instruction reads the module information stored in the area starting from the I/O number specified by "n", and stores it
in the area starting from the device specified by (D).
• For the Universal model QCPU, the following six modules (only Q series) are supported.
• CPU module
• Input module
• Output module
• I/O combined module
• Intelligent function module
• GOT (bus connection)
• For the LCPU, the following four models are supported.
• CPU module
• Input module
• Output module
• Intelligent function module
• The value of n is specified by the first 3 digits of the hexadecimal 4 digits that represent the start I/O number of a module
whose model name is to be read.
When the target module occupies one slot
Universal model QCPU
Power
supply
module
Ver.
Universal
LCPU
Command
Command
R, ZR
J\
Bit
Execution result of the instruction
Module model name
CPU
QX10 QX10 QX10 QX10
module
3E00
0000
0010
0020
0030
H
H
H
H
Specify H3E0 as the start I/O number of the CPU slot.
TYPERD
TYPERDP
U\G
Zn
Word
Setting range
0 to FFH, 3E0 to 3E3H
(Universal model QCPU)
0 to FFH, 3E0(LCPU)
Within each device range
Q68
QY41
QY10 QY10
ADV
P
0040
0050
0070
0080
H
H
H
H
H
Specify K3 or H3 as the start I/O number to be read.
7 APPLICATION INSTRUCTIONS
n
D
n
D
Constant
Others
K, H
Set by
Data type
User
BIN 16 bits
System
BIN 16 bits
Character string
Start I/O number configured in
the I/O assignment setting
7.19 Other Instructions
7
773